TimelineMotorola DynaTAC 8000X

Motorola DynaTAC 8000X

The first handheld cellphone, priced out of most pockets

1983 Mobile phone Motorola

On 6 March 1983 Motorola unveiled the DynaTAC 8000X, the first cellular telephone small enough to carry and simple enough to sell. It weighed close to a bag of sugar, ran for half an hour, and cost $3,995 when it reached customers the following spring.

A telephone that lived in a pocket

Before the DynaTAC, mobile telephony meant a transmitter bolted into a car, or a call placed through a human operator who found a free channel and dialled for you. The 8000X put the antenna, keypad, display and battery in one moulded handset that connected to the network by itself. Motorola dates the unveiling to 6 March 1983 and calls it the first commercially available handheld cellular phone. The accepted unit stood 10 inches tall, 250 millimetres, before the flexible whip antenna was screwed on. Published weights disagree slightly: the FCC-accepted product is recorded at 28 ounces, about 790 grams, while the figure usually attached to the 8000X is 2.5 pounds, or 1.1 kilograms.

Inside was a telephone and very little else. A charge of roughly ten hours bought about 30 minutes of conversation, and the fast one-hour desktop charger was a separate accessory that ran the battery hot. The display was a row of red light-emitting diodes, enough to show a number being dialled or recall one of 30 stored numbers. Nine extra keys around the 12-key pad were marked Rcl, Clr, Snd, Sto, Fcn, End, Pwr, Lock and Vol, each doing a job that software does now.

Ten years between the call and the product

The 8000X was the end of a decade of argument. Martin Cooper, who ran Motorola's systems division, had demonstrated a working prototype in New York on 3 April 1973, calling Joel Engel, the engineer running the rival Bell System programme at AT&T. That prototype was 23 centimetres tall, weighed 1.1 kilograms and offered about 35 minutes of talk time. The point was regulatory as much as technical: the FCC was weighing whether AT&T should get the spectrum for a cellular service, and Motorola wanted to show the commission an alternative that a person, not a car, could use.

Motorola's own timetable then slipped badly. In April 1973 it said the Dyna-Tac would weigh 3 pounds, cost $60 to $100 a month and be fully operational within three years; by 1975 that had moved to 1985, with FCC proceedings named as the reason. Bell Labs spent 1968 to 1983 on the Advanced Mobile Phone System, and AMPS was the network the phone shipped on: 666 paired voice channels, spaced every 30 kilohertz in the 800 MHz band, with calls handed between low-powered cell sites as the caller moved.

What was actually for sale in 1984

The FCC granted type acceptance on 21 September 1983, after which Motorola began beta tests. Quantity production started early in April 1984, and wide availability is dated to 13 April 1984. The price was $3,995, which the Federal Reserve's consumer price index puts at roughly $12,400 in 2025 money. In wages rather than dollars: the US minimum wage was $3.35 an hour in 1984, so the phone represented more than 1,190 hours of work, nearly seven months at a 40-hour week, before tax.

That price kept the 8000X out of ordinary hands. It sold as a business instrument to people whose day depended on being reachable between appointments, and call charges on top of the hardware held the market there. What the buyer got was the first chance for an individual to call from anywhere inside a coverage area with no operator and no vehicle in between.

The first commercial call

Commercial service arrived before the retail product did. On 13 October 1983 David D. Meilahn placed the first commercial wireless call on a DynaTAC from his 1983 Mercedes-Benz 380SL to Bob Barnett, the former president of Ameritech Mobile Communications, who then called the grandson of Alexander Graham Bell in Germany. The call was made at Soldier Field in Chicago, the city where AMPS had been introduced to the public that year.

The network took hold quickly. Britannica records 200,000 AMPS subscribers in the United States at the end of the first year of service, and more than two million five years later. Richard H. Frenkiel, who led system development at Bell Laboratories, told the New York Times that the handset was a real triumph and a great breakthrough.

Why it looked like a brick

Users called it the brick phone, and the name outlived the model, attaching itself to every chunky handset of the 1990s as a term of contrast. The shape was not a design failure. Analogue FM at 800 MHz, on the power budget of early 1980s batteries, left no room for anything slimmer. Motorola shipped a zippered leather case with a clear plastic front and a cutaway for the antenna, which tells you what carrying one involved.

Then it shrank

The 8000X was followed in 1985 by the 8000S and then by a run of updates through the Classic and Ultra Classic lines, each a little smaller, until the MicroTAC of 1989 took over most of the role with a folding design. By the time the StarTAC arrived in 1996 the original brick was obsolete, and the DynaTAC line had been discontinued in 1994. The bet still paid: by 1998, the year John F. Mitchell retired, handsets and service made up two thirds of Motorola's $30 billion in revenue.

Little of the hardware still works. Analogue AMPS networks have closed almost everywhere, which leaves the 8000X a collector's item rather than a telephone. What survives is the argument the product won: that a telephone number could belong to a person rather than a place. Every handset since has been a negotiation about how much of the brick can be removed.

Sources

← See Motorola DynaTAC 8000X on the gadget timeline